Nucleus-M Wireless Lens Control System – Tilta

Quick Adjust Rosette Adapter – Black

jake peterson — Wed, 09 Nov 2022 00:09:27 +0000

Expand the functionality of your Rosettes with the Tilta Quick Adjust Rosette Adapters! These adapters are compatible with any Arri Standard Rosette and they function as a bridge between the rosette mount on your camera or shoulder rig and the rosette connector on your side handle or accessory. Once attached, a thumb accessible release lever allows you to quickly rotate the angle of your…

Source

Nucleus-M Motor Toggle

jake peterson — Mon, 09 May 2022 23:33:58 +0000

This toggle is a replacement screw for the Nucleus M Rod Mount. This allows you to fully tighten your Nucleus M Motor via the Rod Mount to any 15mm or 19mm rod.

Source

Nucleus-M FIZ Hand Unit Arri Standard Rosette Adapter

jake peterson — Tue, 21 Apr 2020 21:04:05 +0000

This Arri Standard Rosette adapter attaches to the back of the Nucleus-M’s FIZ hand unit to give you a way to mount it to monitor cages or anything else that utilizes a rosette-based mounting system.

Source

Nucleus-M Motor Kit I

Joe Lao — Tue, 08 Oct 2019 19:33:18 +0000

This Nucleus-M motor kit allows you to add a motor to your Nucleus-M kit along with the 7-pin to 7-pin power cable that allows you to power the motor from a daisy-chained connection to another Nucleus-M motor.

Source

Nucleus-M Hand Grip to Arri Standard Rosette Single Adapter

Joe Lao — Thu, 19 Sep 2019 20:46:46 +0000

The Nucleus-M: Wireless Lens Control System was designed with versatility in mind. Using this adapter, easily connect your Nucleus-M hand grips to any Arri Standard Rosette connection to allow for handheld or gimbal operation. The package includes one adapter for attaching to a single Nucleus-M hand grip.

Source

Nucleus-M Motor Rod Mount

Joe Lao — Fri, 08 Mar 2019 19:38:21 +0000

This Nucleus-M motor rod mount slides onto the Nucleus-M motor to allow you to attach the motor to your rod setup. When clamped down, the mount fits comfortably around 19mm rods but then also includes removable bushings to allow you to mount to 15mm rods as well.

Source

Nucleus-M FIZ Hand Unit Monitor Bracket

Joe Lao — Thu, 18 Oct 2018 01:40:20 +0000

Use this monitor bracket in conjunction with the Nucleus-M FIZ Hand Unit Arri Standard Rosette Adapter which attaches to the back of the Nucleus-M’s hand unit. This allows you to attach a monitor to the hand unit for a compact focus pulling setup. The extra rosette attachment allows you to attach a variety of other accessories such as the Tilta Wooden Handle 2.0 for a comfortable two-hand…

Source

Nucleus-M 28mm Thick 0.8 Mod Motor Gear

Joe Lao — Wed, 26 Sep 2018 01:44:01 +0000

This motor gear can be used to replace the Nucleus-M motor’s 0.8 mod gear to allow you to use the motor on lenses with telescoping focus gears. NOTE: Removing the original Motor Gear from the Nucleus M Motor may take a significant amount of force and may require using a heat gun to soften a small amount of loctite. Please contact us for assistance!

Source

Nucleus-M 7-Pin to 7-Pin Motor to Motor Connection Cable

jake peterson — Thu, 12 Jul 2018 20:49:18 +0000

This 7-pin to 7-pin power cable is used to provide a daisy-chained link between two Nucleus-M follow focus motors enabling both communication and power distribution between motors. Note that a P-tap to 7-pin or 3-pin to 7-pin cable is needed to power one of the motors first before this cable transfers power and information to another motor. It is available in 18cm or 55cm lengths.

Source

Nucleus-M Run/Stop Cables

Joe Lao — Thu, 12 Jul 2018 01:18:55 +0000

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera. Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips. …

Source